W14x24 rim for Industrial rim Backhoe loader JCB

Wheeled excavators usually do not use tires, but tracks. However, some specific types of excavators, such as wheeled excavators, do have tires. Wheeled excavator tires are called "engineering tires" or "industrial tires."
Features of engineering tires:

1. Wear resistance: These tires usually have high wear resistance to cope with various complex terrains and heavy loads.

2. High load capacity: Engineering tires can withstand the weight of the excavator and the applied workload, ensuring that they are not easily deformed under heavy loads.

3. Puncture resistance: In order to cope with sharp objects that may exist on the construction site, engineering tires usually use reinforced rubber with good puncture resistance.

4. Strong grip: Engineering tires are designed with deep grooves or specialized tread patterns to provide good grip, ensuring that the excavator can travel and work stably on various terrains.
Common types of engineering tires:

1. All-Terrain Tires: Suitable for a variety of terrains, such as mud, sand, gravel, etc., providing good traction and stability.
2. Off-the-Road Tires (OTR): Designed for extreme working conditions, usually used in harsh environments such as mining and construction, with super wear resistance and puncture resistance.
3. Solid tires: Used in extreme conditions, completely solid design, excellent puncture resistance, but relatively heavy, mainly used in areas such as construction sites or scrap yards.
Summary
The tires used on wheeled excavators are called "engineering tires" or "industrial tires". These tires have high wear resistance, strong load capacity and good grip, can adapt to complex construction environments, and ensure the stability and safety of excavators. We are the rim supplier of JCB main engine factory.
We are the first off-road wheel designer and manufacturer in China, and also the world's leading expert in rim component design and manufacturing. We are the original rim supplier in China for well-known brands such as Volvo, Caterpillar, Liebherr, John Deere, Doosan, etc. Before the product is produced, we will first conduct metallographic structure test, chemical element analysis and tensile strength test on the raw materials of the product to ensure that the raw materials meet the labeling. After all the products are completed, we will conduct partial inspections on them, using a dial indicator to detect product runout, a colorimeter to detect paint color difference, a paint film thickness meter to detect paint thickness, an outside micrometer to detect the inside diameter of the center hole, an outside micrometer to detect position, and non-destructive testing to detect product weld quality. A series of inspections to ensure the quality of the product, so as to ensure that the product delivered to the customer is a qualified product.